The year 2022 enabled us to reconnect through in-person meetings with Cetie’s experts in Europe while, for the time being, remote meetings continue for other continents. However, the capacity for many of our members to travel has been restricted and hybrid meetings, which before the pandemic saw 90% of participants coming to Paris, now have an equal balance between those there in person and those attending remotely. As such, our working methods are evolving to accommodate this new reality, but all participants still continue to support the organisation of face-to-face events.
Translation work also continued in 2022. Twenty-one documents were translated, including a complete guide translated into Spanish, a language that is not yet prominent in our library.
This intensive publication work was pursued alongside older documents being regularly reviewed, allowing the oldest of them to be gradually updated.
As a result, the proportion of recent documents in Cetie’s library has risen from 45% to 72% in 3 years.
At end 2022
The main finishes for glass bottles have been revised
The crown finish for beer bottles is now available in a ‘’smoother ‘P’ point” version, a variant of the traditional crown finishes (ISO 12821 and 12822).
Similarly, the “MCA” finish designed for pressurised bottles, particularly sparkling water, for metal or plastic caps, has been carefully reworked, with harmonisation between the versions and a clearer definition.
Other glass finishes are being updated, such as the cork mouth finish (EN 12726), the bar top stopper finish (port wine bottle type), the Verplast finish (for plastic caps, normally used on oil and vinegar bottles), or the “swing stopper” finish designed for beer or traditional lemonade bottles with an imitation ceramic closure system that can be closed using a metallic lever wire.
Finishes for PET bottles are adapting to the “Tethered Caps” Directive
The first finish specially designed to receive tethered caps, GME30.40 – PET Finish 26/22-15,1-1/2,3, has been published and validated by industrial experience, after more than one billion bottles were sold.
The test methods applied to caps for PET bottles have been improved
Guidelines No. 18.01 define the 11 main test methods allowing qualification of snap-top type caps.
Perfume flacon decoration test methods have been harmonised
The main test methods (eight in total) have been established and finalised over the past two years, working closely with perfumers and glass manufacturers. A new “generic bulk” (or simulant) has also been developed that is better suited to modern EHS (Environment, Health, and Security) standards and is closer to new perfume types.
Progress by all of the working groups
2022 saw the emergence within Cetie of the “Reuse of food and beverage containers” group (see Newsletter#2), which met in March for the 4th time. The other groups were not to be outdone, with the series of five newly designed finishes in the “Home & Personal Care” group, PET finishes published or revised with stakeholders from the PET sector, and two revised and expanded PET guides.
Documents published in 2022
PET Finishes and Guidelines
- FS23.00 Plastic cap ovality Guidelines
- GME30.32 PET finish 26/21-8.5-0 for edible oil
- GME30.40 PET finish 26/22-15,1-1/2,3 for tethered caps
- GME30.41 PET finish 26/22-13,4-1/2,3 (Experimental)
- GME33.01 PET finish 28/22-13,5/1,5 turns for HPC applications (Experimental)
- GME33.02 PET finish 38/32-13,5/1/4,24-1,5 for HPC applications (Experimental)
- GME33.03 PET neck 43/37 - for HPC applications (Experimental)
- GME33.04 PET neck 24/18-11,5-1/3,18-1,5 turns for HPC applications (Experimental)
- GME33.05 PET neck 20/13-11,5-1/3,18-1,5 turns for HPC applications (Experimental)
- Guidelines 18.01 Plastic container snap top closure qualification test manual
Metal caps for glass bottles
- Guide N°11 Metallic screw capping defect - identification and correction (Translated into 4 languages)
Flaconnage for perfumery and pharmacology
- DT21.00 Flaconnage glass finishes
- DT29.00 Flaconnage - general application torques
- DT36.00 Test method on glass flacon decorative elements - resistance to immersion in water
- DT36.01 Test method on glass flacon decorative elements - abrasion test - linear abraser
- DT36.02 Test method on glass flacon decorative elements - sun test
- DT36.03 Test method on glass flacon decorative elements - resistance to color deterioration
- DT36.04 Test method on glass flacon decorative elements - vibration tests
- DT37.00 Test method on glass flacon decorative elements - resistance to bulk
Glass bottles and jars
- DT09.00 Factors to convert the mass of water (in g) to true volume (in ml)
- DT12.00 General guidelines for the preparation of glass containers quality specifications
- DT19.00 Labelling spotting bar
- DT26.01 Glossary of glass container visual defects
- DT33.00 Impact test
- DT34.00 Test method of compressibility and elastic recovery
- GME13.10 26 H 126 & 26 H180 crown finishes - dimensions - alternative « P » point
- GME30.11 Finish ALSECO-ALCOA 28
- GME30.15 BVP & BVS minimum through bore
- GME32.00 MCA finishes
Illustration from Shutterstock / 3d_man
Tags :
,
,
,